learnkevin

How to install the blender

06:20:00
0 Comments

How to make a ping pong ball game or brick game

Brick and ball game

Before start making any game you have to take basic knowledge of the games and different requirements which are necessary for any game here i gonna tell you all these basic necessities in brief.So let's start.

About games:

Any game that you used play or have played before the most important part is the graphics quality.any player who plays the game first attracted to it by its graphics quality.
second its processing time that means that the game should not hang,it should run smoothly.Through out the game without the gets hang.

About game designing:

Game designing is quite different then that of the playing a game.
Whenever we design a game we follow some of the common steps:

Load graphics : it detects the graphics comp-abilities.
Initialise : it initialise the game.
Input : in every game there is one function to process all the inputs of the game.
Logic : this is the heart of any game , every logic of the games are lies within logic area.
Score : score is most necessary part because it help in binding the user the game.
Main loop : this runs the all process until game-over not occurs.

Requirements of game:

1:Hardware requirements
2:Graphics requirement

Since we gonna use the C and C++ language to make that game in which we use the C graphics which are not very good for designing games.That by i am gonna make the this ping pong game in Python also which have the high quality graphics but don't afraid of the Python if you don't know how to work with python because i am also give my source code in C or C++ and python both which you can download from the link given at end of this post.

1: In every game code you should place a checker to check the graphics error if any.This step should be done at the start of your game because if you device does not the graphic lib that you have used in your program then it will show some errors at the run time without giving the suitable reasons of the error and your users will get disappoint and not like your game.So the checker do nothing but to display that error on the screen so that user can understand and able to remove it on its level.In my game i use the Load graphics function to this error displaying part.

2: The Setup or initialise part in this part we actually load initial state of the game ,that means starting the environment and all other essentials such as in this game i have initialise the game modes ,initial length of snake, score is equal to zero and what ever else you want to initialise.

3: This section is the most important part because this part help the user to interact with the game.In this section we take all the inputs in a queue and pop them where the input is going to use.

4: This is the Heat of your game ,the logic of the game because it actually differentiate one game from other game and also all logic and algorithms those are used in a game are placed within this section.

5: In this section we refresh the score board. All the points gain or lost by the user during the play are changed after one cycle of your game.

6: Game Over

Download My ping pong game source code (header file from the link given below):

1: Source code for C and C++ click here.

2: Source code for Python "coming soon".

Thank you for reading the post and if you like the post and you find it beneficial to you then please like and share the post. and if you have any query then please leave the comment below.

12:23:00
0 Comments

How to make a snake game in c

how make a snake game in c or c++

How to make a snake game using c or c++

Snake game

Before start making any game you have to take basic knowledge of the games and different requirements which are necessary for any game here i gonna tell you all these basic necessities in brief.So let's start.

About games:

Any game that you used play or have played before the most important part is the graphics quality.any player who plays the game first attracted to it by its graphics quality.
second its processing time that means that the game should not hang,it should run smoothly.Through out the game without the gets hang.

About game designing:

Game designing is quit different then that of the playing a game.
Whenever we design a game we follow some of the common steps:

Load graphics : it detects the graphics comp-abilities.
Initialize : it initialize the game.
Input : in every game there is one function to process all the inputs of the game.
Logic : this is the heart of any game , every logic of the games are lies within logic area.
Score : score is most necessary part because it help in binding the user the game.
Main loop : this runs the all process until game-over not occurs.

Requirements of game:

1:Hardware requirements
2:Graphics requirement

Since we gonna use the C and C++ language to make that game in which we use the C graphics which are not very good for designing games.That by i am gonna make the this snake game in Python also which have the high quality graphics but don't afraid of the Python if you don't know how to work with python because i am also give my source code in C++ and python both which you can download from the link given at end of this post.

1: In every game code you should place a checker to check the graphics error if any.This step should be done at the start of your game because if you device does not the graphic lib that you have used in your program then it will show some errors at the run time without giving the suitable reasons of the error and your users will get disappoint and not like your game.So the checker do nothing but to display that error on the screen so that user can understand and able to remove it on its level.In my game i use the Load graphics function to this error displaying part.

2: The Setup or initialize part in this part we actually load initial state of the game ,that means starting the environment and all other essentials such as in this game i have initialize the game modes ,initial length of snake, score is equal to zero and what ever else you want to initialize.

3: This section is the most important part because this part help the user to interact with the game.In this section we take all the inputs in a queue and pop them where the input is going to use.

4: This is the Heat of your game ,the logic of the game because it actually differentiate one game from other game and also all logic and algorithms those are used in a game are placed within this section.

5: In this section we refresh the score board. All the points gain or lost by the user during the play are changed after one cycle of your game.

6: Game Over

Download My Snake game source code (header file from the link given below):

1: Source code for C and C++ click here.

2: Source code for Python "coming soon".

Some Screen shots of the final game.

Thank you for reading the post and if you like the post and you find it beneficial to you then please like and share the post. and if you have any query then please leave the comment below.

05:36:00
0 Comments

How to transfer data faster through Lan cable

How to transfer data faster through LAN cable

How to transfer the data faster and without pen derives or external hard disk.I know that transferring data from one computer to other is very frustrating while doing with a pen drives or external hard disk,first copy the data to these devices and the unplugging and plugging it to other computer and the past the whole data to that computer ,it takes lots of time in doing it also the data transfer speed with these device is not good its about 3-4 Mbps ,that means its gonna take a lots of time to transfer the data.

But in this post I am gonna tell you how you can transfer large data faster then ever before using the LAN cable.with this trick you can actually transfer 100 GB of data in just 1 hour that means you can actually save a lots of time for you. This method will be very helpful for transferring data from one computer to other with about 10-15 Mbps of transfer speed.You just need to follow my step by step guide to do this faster then ever before.

How to transfer data faster through LAN cable

Connect both the computers/Laptops with the LAN cable perfectly.
If you are done with this then open the control panel in both the computers

and click on Change advance sharing options. You can get this option in your both the computers as Control Panel > Network and Internet > Network and Sharing Center > Advanced sharing settings. And make sure you turn on network detection and turn off password protection off.
Now you need to open the Network and connections to keep both the computers on same network Open Control Panel > Network and Internet > Network and Sharing Center.

You have left click on the Ethernet option shown above.
Now just have one more small step to you will be connected to transfer the data between the two computers.When you click on the Ethernet option it open up a popup window the extreme right one you can see in image.Click on the properties button which will open the middle window in which you have to select the IPv4 option and you will see below the properties button gets highlighted now you have to click on the this button which open the third window the extreme left.You need check the option Used the following IP address.
After you check this option in your both computers you need to fill these spaces with the following IP address as show below. when you done press OK and save the settings.

Put the following value on 1st computer

Ip address 192.168.1.1
Subnet mask 225.225.225.0
Default gateway 192.168.1.3

Put the following value on 2nd computer

Ip address 192.168.1.3
Subnet mask 225.225.225.0
Default gateway 192.168.1.1

Now your two computers are connected successfully you can transfer the data between the two computers.
How you can transfer the data after you are connected.

First choose a file and copy this file when copying in complete open your My computer there you can see a option Network in the bottom-left as
Click on that option and you will see two compter listed there one is yours and the other one is one which is connected to your computer.to send files you just have to paste the copied file in to that computer.

Its all you have to do and now you will see the data transfer speed between the computers.
Thank you for reading the post and if you the method discussed in the post and you find it beneficial to you then please like and share the post. and if you have any query then please leave the comment below.